-
73GB / 72GB 80-pin 10K / 15K SCSI Hard Drives
73GB / 72GB 80-Pin SCSI hard drives are exclusively for usage in servers that does use hot swappable drives with a hot pluggable backplane. If you use a hard drive tray or caddy or sled, and simply slide and clip the drive into the front of your server, then this is the correct type of SCSI hard drive. Hot-swap 80pin drives are commonly used in
-
146GB / 147GB 80-pin 10K / 15K SCSI Hard Drives
146GB / 147GB 80-Pin SCSI hard drives are exclusively for usage in servers that does use hot swappable drives with a hot pluggable backplane. If you use a hard drive tray or caddy or sled, and simply slide and clip the drive into the front of your server, then this is the correct type of SCSI hard drive. Hot-swap 80pin drives are commonly used in
-
300GB U320 80pin 10K / 15K SCSI Hard Drive
300GB 80-Pin SCSI hard drives are exclusively for usage in servers that does use hot swappable drives with a hot pluggable backplane. If you use a hard drive tray or caddy or sled, and simply slide and clip the drive into the front of your server, then this is the correct type of SCSI hard drive. Hot-swap 80pin drives are commonly used in
-
72GB (SAS) 3.5
Capacity 72 GB
Height 1.0 in (25.4mm)
Width 4.0 in (101.6mm)
Interface SAS
Transfer Rate 3 Gb/sec
-
146GB (SAS) 3.5″ Hot Plug 15K /10K Hard Drive
Capacity 146 GB
Height 1.0 in (25.4mm)
Width 4.0 in (101.6mm)
Interface SAS
Transfer Rate 3 Gb/sec
-
300GB (SAS) 3.5″ Hot Plug 15K /10K Hard Drive
Capacity 300GB
Height 1.0 in (25.4mm)
Width 4.0 in (101.6mm)
Interface SAS
Transfer Rate 3 Gb/sec
-
Dell 1TB SATA 3.5
Capacity 1TB
Height 1.0 in (25.4mm)
Width 4.0 in (101.6mm)
Interface SATA
Transfer Rate 3 Gb/sec
-
-
-
-
600 GB SAS 3.5″ 10k RPM Hard Disk Drive
600 GB SAS 3.5″ 10k RPM Hard Disk Drive
-
450 GB SAS 3.5″ 10k RPM Hard Disk Drive
450 GB SAS 3.5″ 10k RPM Hard Disk Drive